[Status: Investigating ๐Ÿ•ต๏ธโ€โ™€๏ธ] Allow Subtasks to Update Start and End Dates of Parent Tasks

I think this is somewhere else in the community, but when I posted something else as a suggestion in the regular community area, I was asked to place my suggestion (Dependencies in the Table View) here in the Product Feedback section.

 

It would be helpful to have a setting to allow subtasks to drive the dates for the parent tasks.  Right now it's manual.  There are some who prefer it that way, and some who do not, so it would be nice to be able to set that on a per-project basis.

315
133 comments
Spot On Innovative Approach Stellar Advice
Avatar

Sam, sorry one more point of feedback.  I have tested ClickUp extensively - but stayed with Wrike due to the super flexible hierarchy.  ClickUp has a useful feature that simply asks a user who is trying to close a task with unfinished subtasks if they really want to do that:

It's a relatively simple setting, so I don't think it complicates the tool much at all.  

This also pops up if there is another assignee, so one assignee doesn't close without getting prompted to insure the other assignee has also done his/her part of the task. 

I think this would be a useful feature to replicate in some format.

Thanks!

0
Comment actions Permalink
Spot On Innovative Approach Stellar Advice
Avatar

I know wrike already does that... kind of.

 

If you complete a task, but it has subtasks that are still active, a SMALL popup appears for a time, asking if you want to apply it to the subtasks too.  

 

I think it should be more prominent like in your screenshot.

0
Comment actions Permalink
Spot On Innovative Approach Stellar Advice
Avatar

Sam, thanks for pointing that out!  I tried it and sure enough I got this:

I think ClickUp's got some more sophistication and functionality in their version, but good that we have something here in Wrike.

By the way, I think the "floating box" is way underused in Wrike, I have another feature request about that here:

https://help.wrike.com/hc/en-us/community/posts/360033090674-More-implemenatio-of-the-floating-box-when-activity-takes-place-in-Wrike-like-task-creation

I frequently create tasks and would like to see what happened to them, but they are hard to track down at times.  For example, I don't always seem to be able to easily find in "recent" in the search box what I just created.

Finally, I actually responded to you with much more detail earlier but the post is showing as "pending approval" still - wonder if I used some term the bots flagged up?  Hopefully it will release to the thread soon!

Thanks for this tip, cheers!

0
Comment actions Permalink
Spot On Innovative Approach Stellar Advice
Avatar

What's the status on this?  I've read thru this entire thread and still don't see a valid solution.  This is the most basic of project scheduling fundamentals and I am dumbfounded as to why Wrike wouldn't assume this to be a core function from the very beginning.  Here's my take and temp workaround... 

Take the example below (Imported from MS Project), where the summary tasks dates do not align with the sub-tasks:

If one changes the dependent predecessor of the summary to 108FS to match the first sub-task, then the summary magically updates:

But, if one updates the duration of the first sub-task from 5d to 10d, the summary does not update (Yes I've read about task alignments, but task alignments only extends summary tasks to encompass sub-tasks...Does not pull in start dates).

The only workaround I've found is to delete the dates of a summary task entirely.  Then sub-tasks update the summary automatically (but only graphically)....

Dates deleted...

Sub-task updated and summary updates on the Gantt chart.

Issues with approach are pretty obvious in reporting and managing projects.  My two cents.

0
Comment actions Permalink
Spot On Innovative Approach Stellar Advice
Avatar

This thread was started 2.5 years ago. Is Wrike planning to release this feature? I agree with others as a former MS Project user that parent task aligning with its sub-tasks' duration is a basic project management tool feature, and extremely helpful when viewing a summarized version of the task list (i.e. parent tasks only).

2
Comment actions Permalink
Spot On Innovative Approach Stellar Advice
Avatar

Adding a vote for this very needed feature.

I am on my trial period for Wrike to replace our PM system and I have to say I was falling in love with the tool until I struggled for hours to try to get the Parent task to reflect the soonest start date of the subtasks and the latest end date of the subtasks. I gave it a good deal of time trying to use dependencies to reflect these dates, but then it breaks quickly when the subtasks dates change.

Please make this happen!

0
Comment actions Permalink
Spot On Innovative Approach Stellar Advice
Avatar

Hi everyone! This is the second most popular suggestion on our Product Feedback forum, so thank you all for keeping this going! Our Product team has recently released a related improvement in the Table View which allows to rollup dates on the project level. And the team continues to investigate and plan to add dates' rollup for tasks/subtasks. Hopefully, I'll be able to share more details in Q1 2020. 

A huge thanks to all of you for the feedback! 

Lisa Community Team at Wrike Become a Wrike expert with Wrike Discover

0
Comment actions Permalink
Spot On Innovative Approach Stellar Advice
Avatar

Hi again! I checked with the team - no updates at the moment except for the fact that the research continues as this is a rather significant change. I'll let you know more as soon as I have news! Thank you for your feedback and support here! 

Lisa Community Team at Wrike Become a Wrike expert with Wrike Discover

0
Comment actions Permalink
Spot On Innovative Approach Stellar Advice
Avatar

Talk about frustration.....this function/feature has been requested for over 2 years.   Wrike promotes it's Gantt Chart as a viable project management tool, but without roll up to parent tasks or project, then what's the point?   C'mon.....you guys have got to get this function implemented.

0
Comment actions Permalink
Spot On Innovative Approach Stellar Advice
Avatar

Welcome to the Community, Terry Howat! As I mentioned above, dates roll-up is now available in the Table View - Wrike automatically checks the start and end dates of all subprojects, tasks, and subtasks within the project and sets the earliest start date and the latest end date for the project. Here's more info: https://help.wrike.com/hc/en-us/articles/209603489-Projects#rollup

As for Gantt Chart, you can roll-up dates there as well:  when you roll-up dates

  • Start date: the earliest date that an item within it starts
  • Due date: the latest date that an item within it ends

Here are the details: https://help.wrike.com/hc/en-us/articles/360009420853-Roll-Up-Dates-on-the-Gantt-Chart-

Hope this is helpful! 

Lisa Community Team at Wrike Become a Wrike expert with Wrike Discover

0
Comment actions Permalink
Spot On Innovative Approach Stellar Advice
Avatar

Lisa that works great for the Parent Project, what about sub projects under the parent?

0
Comment actions Permalink
Spot On Innovative Approach Stellar Advice
Avatar

Lisa my apologies.....I did not read as deep as should have.   I now see the roll up options.  Can these be enabled in our blueprints?

 

0
Comment actions Permalink
Spot On Innovative Approach Stellar Advice
Avatar
Hugh

Hi Terry Howat, hope you don't mind me jumping in for Lisa here.

Yes, you can use roll-up in Blueprints! You can use it in projects created from Blueprints as well, it works the same as for any other project in the Workspace.

Hope this helps! If you have any other questions, let me know ๐Ÿ˜Š

0
Comment actions Permalink

Folllowing List for Post: [Status: Investigating ๐Ÿ•ต๏ธโ€โ™€๏ธ] Allow Subtasks to Update Start and End Dates of Parent Tasks
[this list is visible for admins and agents only]

Didnโ€™t find what you were looking for? Write new post