Email Forwards appearing as Tables

I don't know if anyone's had this issue - but emails forwarded to Wrike to create Tasks end up with the body repeated and formatted strangely within a Table view. It's obviously not at all how we want this to work! 

Any guidance or assistance would be much appreciated :)

Ben

2
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos
15 comments

*bumping up * happens to me too.

1
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos
Avatar
Stephanie Westbrook

@Ben @Noel are these emails with HTML formatting?

0
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos

@Stephanie -- yes they are. I added one just now to test again.

 




1
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos

@Stephanie, I can confirm that this is only HTML formatted emails on my end as well.

0
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos
Avatar
Stephen

Hi guys, thanks for testing. Our team is aware of the issue. I've raised Ben's original post to the Support Team so the team can be made aware of this post and I'll report back here once I know more 👍🔧

0
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos

We have been struggling with the same issue.

As a workaround, we have decided to create a new task in wrike and then copy/paste the content of the mail into the description.

This works for us because of the following circumstances:

  • we all have dual monitors, so we can have our mail client on one screen and wrike on the other
  • we usually want only the relevant part of a long email chain in our task descriptions
  • we're spending some additional time with the task anyway, as we want the task title to be something other than the email's subject (and the description to include more than just the email's body)

If circumstances are similar for you, I recommend this workaround. It's not perfect, but it won't cost you any significant amount of additional time compared to directly sending the mail to wrike.

0
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos
Avatar
Stephen

I can see the development team are currently investigating the issue. I've requested more information about when we should see this working as usual again.

@Daniel, thank you for sharing this workaround to use for now 🙌

0
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos

I've been experiencing this issue, and it's finally impacted a mission-critical part of our workflow so I dug as deep as I could on my own.

The emails that were affected in my experience, were emails that had gone through sendgrid, which adds in some extra html markup in order to give it space to also insert a tracking pixel.

It looks like wrike is tripping up on this markup - in my test cases it would then ignore html which is usually 'allowed' by wrike (as documented here: https://developers.wrike.com/documentation/api/datatypes/description), as well as ignore any line breaks, so the original email looks worse than even the plain text version.

Can the development team look into either presenting the text/plain encoded version if the text/html encoded version will entail stripping some tags, or better yet tweak the parser to strip the table/tr/td/span html tags which as I said are just added in by sendgrid, and then process the rest of the email.

0
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos

*Bump*

0
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos
Avatar
Stephen

Hi Saadia Simon, our development team has looked into this and you're somewhat correct, it is due to the HTML formatting that these tables are appearing. If you're sure there are no nested tables in the email (including your signature), then these tables should not appear in the Wrike task.

Unfortautelty a fix for this in the description area will not be added to the short-term roadmap ahead of other essential updates. For now, a very manual workaround of copy and paste as plain text is the best route of action to take.

I'll be sure to post back here when I have any new information.

0
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos

Thanks for the response. There are nested tables, but they are added automatically by sendgrid, which powers a huge proportion of saas-generated emails and I'm certain affects a lot of wrike users, even if for most use-cases it's just a minor irritation (as it was for us, until now).

The manual solution won't work for our use-case which involves generating dozens of emails automatically from our reporting system to create relevant tasks.

I'm disappointed that this issue isn't being given higher priority (as a part of the general formatting options within the description field).

1
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos

Stephen,

This basically makes your email integration worthless. Not going to fix it in the near term? I can't think of any other platform I've used that had this issue...for at least the past 10 years. We're fast approaching a year since this was reported and it's affecting me on a daily basis and making the content we put into wrike unreadable. I can't think of a simpler fix to address, especially something as visible to end users as this. 

Sorry to be harsh, but there needs to be a development track separate from all the whiz bang features you're working on to address this sort of thing. I've never heard of teams releasing defective features and then moving on to the next feature. Seriously! Is there any testing going on before each release? Clearly the acceptance criteria are incomplete if there is. 

There is pleasing users, and then there is just plain rigor and maturity in devops. 

1
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos

@Mike Hey, jumping in for Stephen here. Thanks for bringing this up, I'll raise a ticket for you to keep the record and get back here when I have an update. 

Lisa Community Team at Wrike Wrike Product Manager Become a Wrike expert with Wrike Discover

Lisa Wrike Team member Become a Wrike expert with Wrike Discover

0
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos

We are also having this issue.  We have a trigger set up in Zendesk to create a task in Wrike when one of our agents' requests training on a ticket they come across.  For a while, we would get blank tables and the text from that trigger with the training details.  Now, we only get blank tables and none of the text is coming through.  This has put a complete stop to this process and does not notify management when an agent needs additional training.

0
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos

@Mistyamber Hey, thanks for reaching out! I've raised a Support ticket for you, the team will be soon there to help!

Lisa Community Team at Wrike Wrike Product Manager Become a Wrike expert with Wrike Discover

Lisa Wrike Team member Become a Wrike expert with Wrike Discover

0
👍 Spot On 💡 Innovative Approach 💪 Stellar Advice ✅ Solved 🪄 Remove Kudos

Folllowing List for Post: Email Forwards appearing as Tables
[this list is visible for admins and agents only]

Top
Didn’t find what you were looking for? Write new post